Floccin Value Points Newsletter Published
May 6, 2011 at 5:18 pm | Posted in Wastewater Water Chemicals Addition | Leave a commentDavid Wensloff has written a piece on how Floccin flocculating agents can improve wastewater treatment.
David goes into great depth how using Floccin you can optimize your wastewater treatment, and how you have to consider all aspects of the wastewater treatment system to get a fair view of where the savings potential is.
Mexican Textile Dyeing Wastewater Case Study #2
February 9, 2011 at 8:18 pm | Posted in Textile | 1 CommentSecond Mexican Textile Dyeing Wastewater Case Study
Increase Capacity, Increase Compliance, Increase Profits *
This facility dyes material and this is a sample of their dye wastewater.
The pH was 7.27 and Floccin™ JP+ was used at a dosage of 0.5 grams/1,000 ml (4.17 lbs or 0.5 kg/ton of water).
The treated pH was 9.15.
The water was then filtered to simulate a settling or liquid/solids separation step.
The untreated suspended solids was measured at 285 ppm and the treated suspended solids were 25 ppm.
Click to Download pdf of this Mexican Dyeing Wastewater Case Study #2…
Download more industrial wastewater treatment case studies here…
Mexican Textile Dyeing Wastewater #1
February 9, 2011 at 8:15 pm | Posted in Textile | Leave a commentFirst Mexican Textile Dyeing Wastewater Case Study
Increase Capacity, Increase Compliance, Increase Profits *
This facility dyes material and this is a sample of their dye wastewater.
The pH was 9.73 and Floccin™ 909 was used at a dosage of 1 grams/1,000 ml (8.34 lbs or 1 kg/ton of water).
The treated pH was 9.3.
The water was then filtered to simulate a settling or liquid/solids separation step.
The untreated suspended solids was measured at 1,130 ppm and the treated suspended solids were 9 ppm.
Click to Download pdf of this Mexican Dyeing Wastewater Case Study…
Download more industrial wastewater treatment case studies here…
Happy New Year 2011!
January 5, 2011 at 11:19 am | Posted in Main Industrial Wastewater Treatment | Leave a commentTags: industrial wastewater treatment, wastewater treatment
Happy New Year to every one, and looking forward to a great 2011!
Get your industrial wastewater treatment here.
Thanks!
Integrated Engineers Inc.
Textile Dyeing Brazil
July 19, 2010 at 8:34 am | Posted in Main Industrial Wastewater Treatment | Leave a commentTextile Dye Wastewater Jar Test
This facility dyes material and this is a sample of their red dye wastewater. The pH was 10.46 and Floccin 1108 was used at a dosage of 2 grams/1,000 ml (16.7 lbs or 7.6 kg). The treated pH was 6.7. The water was then filtered followed by ozonation to remove the rest of the color.
Click Here to Download pdf of Case Study…
Happy Thanksgiving!
November 26, 2009 at 3:09 pm | Posted in General | Leave a commentA Happy Thanksgiving to Everyone!
From All of Us Here at Integrated Engineers Inc,
Liquid Solid Separation
November 4, 2009 at 3:44 pm | Posted in Liquid Solids Separation | Leave a commentTags: Liquid Solid Separation, Separators
Sort of out of order considering I was going to post about the steps of wastewater treatment, but I was thinking about liquid solid separation.
Anyway, liquid solid separation seems like a pretty obvious part of wastewater treatment because at its core wastewater treatment is really water filtering. Since many industries and municipalities wind up with sludge or thick yucky wastewater that really isn’t water liquid solid separation looms large.
So after pH adjust if any, and flocculant addition to grab onto the suspended solids, liquid solid separation begins.
What happens at this point is that the solids began to settle out of the watewater. You can use various methods of taking the solids off for dewatering at this stage.
So liquid solid separation is key to efficient wastewater treatment, in many respects it is the core of wastewater treatment.
Read more about liquid solid separation and holistic wastewater optimization…
Green Wastewater Technology
October 20, 2009 at 5:36 pm | Posted in Main Industrial Wastewater Treatment, Wastewater Optimization | 1 CommentTags: green waste management, green wastewater technology
Not usually associated with wastewater treatment “green” is never more appropriate than when applied to an already existing practice, industrial wastewater treatment.
Green Wastewater Technology
Think about it. Back in the day, industries had plentiful water, no regulations and would produce as fast and as cheap as possible, dumping wastewater usually in the nearby river. Then something became apparent. That practice and practices like it were destroying our way of life ultimately. It’s not that “destroying the environment” is accurate because there is no “the” environment there is only our one earth “our” environment and pollution isn’t a desirable thing in our environment.
So anyway, waste water treatment started, so in a way, industrial wastewater treatment in and of itself has always been a “green” practice.
Wastewater Treatment Systems
October 20, 2009 at 3:41 pm | Posted in Main Industrial Wastewater Treatment | Leave a commentTags: wastewater treatment system, wastewater treatment systems
Get the most out of your wastewater treatment systems with a wastewater optimization.
Whether you have a wastewater treatment system online or need to find out more about how, what, why your wastewater treatment system should be check out Integrated Engineers Inc and their Wastewater Optimization process.
Today what with the demand for green technologies there is really no excuse not to have the best, most efficient, and top performing wastewater treatment system.
Wastewater Aeration
October 20, 2009 at 9:05 am | Posted in Biological Waste Water Treatment | Leave a commentTags: oxygenation, oxygenator, wastewater aeration, wastewater aeration equipment, wastewater aeration systems, wastewater aerator, wastewater aerators, wastewater treatment aeration
The Oxygenator Wastewater Aerator by Integrated Engineers Inc.
Of all wastewater aeration systems & wastewater aeration equipment the most efficient use pure oxygen injection.
In seeking the ultimate and super efficient wastewater treatment aeration using specialized custom wastewater aerators is mandatory.
Introducing The Oxygenator…
The Oxygenator Wastewater Aerator
With the Oxygenator, super efficient oxygenation is achieved in aerobic wastewater basins using a custom aerator and pure oxygen.
The Oxygenator is usually used in conjunction with an Oxygen Flow Controller which controls the flow of Oxygen to The Oxygenator based on the dissolved oxygen levels in the aeration basin. Pure oxygen is typically supplied by a VSA oxygen concentrator of bulk delivery of liquid oxygen.
Typical Oxygenator, Oxygen Flow Controller, and VSA Installation
Blog at WordPress.com. | Theme: Pool by Borja Fernandez.
Entries and comments feeds.
